Bending Machines for Anchor Bolts (mild steel) 1 3/4 IN – 2 1/4 IN OD

image of Pedrick Model B-10 Tube and Pipe Bending Machine

Model B-10 Anchor Bolts Bending Machine

The Pedrick Model B-10 bender offers an exceptional value. It is a heavy duty bending machine that creates a bending moment of 75,000 inch-lbs. This is three times the capacity of the Pedrick Model A-7 bending machine at less than two times the price! Like all Pedrick benders, this model is typically supplied with limit switches, which can be set for repetitive bending. Digital controls are also available. The bender shown on the left is tooled to bend 3/8 inch x 12 inch A36 plates to 1 1/2 inch inside radius, 0-180 degrees. Dies were provided to bend a variety of plate sizes up to and including 1/2 inch x 12 inch plates to bend radii ranging from 1 1/2 inch to 12 inch. A large shipbuilding company uses the bent parts for cable collars through bulkheads.

 

> view the parts list
HP Bending Moment Pipe Capacity Tube
Capacity (crew)		 Round Barstock Approx. Weight Spindle Diameter Floor Space
10 75,000 IN-lbs 2 IN SCH 80 2 7/8 IN OD X .187 WT 2 1/2 IN OD 6500 lbs 4 1/2 IN 4 ft x 4 ft
37.5 kW 8500 N-m 73 MM 73 MM X 5.2 MM 64 MM 2955 kg 114 MM 1.2 M x 1.2 M
image of Pedrick Model B-10 Tube and Pipe Bending Machine

Model DD-10 Anchor Bolts Bending Machine

 

HP Bending Moment Pipe Capacity Tube
Capacity (crew)		 Round Barstock Approx. Weight Spindle Diameter Floor Space
5 100,000 IN-lbs - - 2 1/4 IN OD 2,500 lbs - 42 IN x 64 IN
3.7 kW 11,000 N-m - - 57 MM 528 kg - 1.3 M x 1.9 M