PEDRICK BENDING MACHINES for Square Tube 1 1/2 IN X 1 1/2 IN X .080 IN

APPLICATIONS

WHAT IS ROTARY COMPRESSION

Pedrick Pipe, Tube, and Solid BarStock Benders operate on the rotary compression bending principle. It consists of a stationary die and an arm that rotates around the die and wipes the material to be bent into the die.

Bends can be produced in pipe and tubing that can be used to reduce cutoffs, end preparation, fittings and welds, which saves money. The compression bending process is well suited for bending heavy sections.

Solid round barstock (1/4 - 3 in. OD) can be bent for many industrial applications. A variety of structural, roll-formed, and extruded sections can be bent using the rotary compression bending process.

BENDING MACHINES for Square Tube 1 1/2 IN X 1 1/2 IN X .080 IN

image of Pedrick Model A-5 Tube and Pipe Bending Machine

Model A-5 Square Tube Bending Machine

The Model A-5 Bending machine has the same housing as the Model A-3, with heavier gears, bearings and a 5 HP gear drive. It has the capacity to bend 2 inch schedule 40 IPS and #12 rebar. This machine is very popular for handrail applications. Pedrick benders can be tooled to bend a variety of materials including channels, rectangular tube, structurals, and many others. The adjacent bender and insert show an application for bending 1 inch OD solid barstock to 1/2 inch inside radius.

> view the parts list

HP	Bending Moment	Pipe Capacity	Tube Capacity (crew)	Round Barstock	Approx. Weight	Spindle Diameter	Floor Space
5	20,000 IN-lbs	2 IN SCH 40	2 3/8 IN OD x .187 WT	1 1/2 IN OD	1750 lbs	3 IN	3 ft x 3 ft
3.7 kW	1900 N-m	60.3 MM	60 MM x 4.7 MM	38 MM	795 kg	76.2 MM	.9 M x .9 M